Products

01553 404617

info@crcservice.co.uk

01553 404617

info@crcservice.co.uk

We only install the latest and best quality solar products

Inverters

GivEnergy Hybrid PV Battery Inverter

ivEnergy design and manufacture their own inverters, batteries and state-of-the-art management system and monitoring platform which combine to offer an exceptional storage package.

The third generation of the GivEnergy Hybrid inverter is a DC-coupled storage solution which allows you to seamlessly integrate battery storage into PV systems.

The GivEnergy Gen 3 hybrid inverter offers all of the benefits of the GivEnergy Gen 2 hybrid inverter while benefiting from a cleaner design discretely enclosing the connection ports. The 5kW Gen 3 hybrid inverter comes with an increased backup power output capability of 5kW when Solar and Battery are used in tandem.

Inverters

Solar Edge Screenless HD Wave Technology

Marked as a milestone in inverter technology, the award winning HD-Wave Technology is a record-breaker in efficiency tests. Small, light, efficient and superbly reliable – SolarEdge’s single phase inverters with innovative HD-Wave technology are now a firm favourite for installers and end-customers alike. SolarEdge inverters will only work with power optimisers, which control module-level Maximum Power Point Tracking and voltage management. This means that the inverter is only responsible for DC to AC inversion – this is the secret of the HD-Wave technology. It uses smaller, lighter and more reliable thn film capacitors, allowing SolarEdge to rid most of the heavy metal parts from the inverter. (12 years warranty) (Extendable warranty available)

The SolarEdge power optimizer is a DC/DC converter which is connected by installers to each solar module, turning them into smart modules. The SolarEdge power optimizers increase energy output from PV systems by constantly tracking the maximum power point (MPPT) of each module individually. Furthermore, the power optimizers monitor the performance of each module and communicate performance data to the SolarEdge monitoring platform for enhanced, cost-effective module-level maintenance.

Solis inverter 4G

2.5-6kW Single phase series string inverter’s efficiency of has improved dramatically. Solis-1P(2.5-6)kW-4G series are suitable for the installation of single-phase input pv system of different types, residential, commercial and industrial and adopt ultra-high switching frequency, ultra-thin single four-layer board design can greatly reduce the risk caused by the connector. (5 years warranty) (Extended warranty available)

Panels

Trina Vertex S 415W all black Mono

Based on advanced technology from the Vertex platform, the new Vertex S module is perfectly designed to fulfill power, efficiency, size, weight, appearance, mechanical load and reliability requirements of rooftop applications to give the best balance of power and size & weight. The quality control Trina applies is more stringent then regulation requirements, with over 30 in-house tests, that allow Trina to offer a product warranty of 15 years and a warranty on output of 25 years.

EV Charging

MyEnergi, Zappi

The Zappi is Myenergi’s smart EV charger, with which you can charge your car when and how you want. As with all of their products, it’s designed to work seamlessly with solar PV, and battery storage. It monitors exported power from the property and, in ECO mode, controls the charging rate of the EV to match the available surplus generation. This means that you can charge your car for free!

Storage

GivEnergy 3kW AC Coupled Inverter Charger

This AC coupled 3kW unit will charge from surplus PV generation, and also from the grid if you’re on an economy tariff. Wi-fi comes as standard and gives access to the powerful monitoring platform, along with remote, site-specific firmware upgrades and troubleshooting via web browser or app. Full UK technical support is also on-hand, and every inverter purchase receives 30mins installation support as standard. The in-house control logic allows for simultaneous switching between charge and discharge to minimise imported energy, whilst export limitation is also available

GivEnergy All in One 13.5KW

The All in One is a state of the art home battery with a built-in inverter. It allows you to have 13.5kWh of usable home storage. The All in one comes with a gateway system that allows you to have full home back up in case the mains power goes down. The most impressive part of this whole system is the discharge rate of 6Kw continuous and 7.2kw for 10 second spikes. 

The All in One is truly an industry titan with its impressive features and sleek design. It is waterproof with an IP rating. It includes mobile monitoring and a 10-year battery warranty. 

Immersion Controller

MyEnergi, Eddi Immersion Controller

Eddi is an energy management system for use with grid-tied PV or wind turbine systems. Excess energy from the microgenertation system is used to heat water or rooms rather than exporting it to the grid. Two heaters are supported (typically top and bottom immersion heaters). A grid current sensor (supplied) simply clips around the incoming supply cable. This sensor is used to monitor excess power and eddi automatically adjusts the voltage to the heater load, thereby consuming the surplus power.

Solar iBoost Plus Immersion Controller

The two parts of the Solar iBoost+ system talk to each other wirelessly. There is a Sender that measures how much is being exported which transmits information to the actual Solar iBoost+ itself and this responds by releasing the free energy available to heat up water in your customers tank.

Simple to install wireless energy sensor

The Solar iBoost+ unit receives information wirelessly from the sender unit and controls the power to the immersion heater.

Mounting

Fastensol

These steel galvanised brackets are used to secure the mounting rails to the roof beams. These are suitable for pantile and concrete tiled roofs only, but a version for flat tile roofs is also available. To fit, a few tiles are removed from the outside of the roof and the hook secured to a rafter with the wood screws provided. Plywood padding can be used to ensure the correct spacing from the tile surface. The tile are simply replaced around the hook ensuring a weatherproof finish.

BOOK A FREE CONSULTATION WITH A SPECIALIST TO FIND OUT HOW YOU CAN BENEFIT